Brita Longlast Filter Review 2022

Brita has become synonymous with clean water due to its high-quality service, which you can get in the market.

Brita can provide quality water filters to buy at an affordable cheap price for domestic as well as commercial.

But, Many had to face hardship in changing the filter, again and again so, Brita introduced the longlast filter as a better option.

Brita Longlast filter has a six-month life that needs a replacement filter only two times a year that has three times longer life than a zero water filter.

Today, we’re going to explore filter effectiveness with this Brita Longlast filter review 2022 article.

Although the Brita brand name holds some weight, so let’s try to find out what these products say for themselves.

Brita longlast filter pitcher review for Mercury, Chlorine, lead reduction.

Your tap alkaline water is one of those things that you don’t want to use for a drink, food, coffee until it is safe and clean so you can use a Brita filter pitcher.

That’s why Brita designed the Longlast filter to give a satisfactory result.

Chlorine uses during the treatment of water but, you can feel its taste and odor in tap water hope you don’t like it.

There is the full possibility to enter copper and lead in the water during traveling in pipelines.

Mercury is also a harmful contaminant that could enter when water gets tainted with farming or manufacturing runoff or even sewage.

Brita Longlast Filter review

Luckily the Brita longlast water filter can remove over 99% of all contaminants and finally provide great tasting water for your family.

We have a great review list of the Best 10 alkaline water pitchers 2022 including Brita longlast and standard filter pitcher from different criteria.

So, let’s go and review deeply on different aspects of Brita longlast water filtration.

Impressive Six-Month Lifespan

Most of us complain Brita filters have a short life of just 40 gallons, the need to be changed after two months.

But a longlast filter has 3x more life than a standard water filter, which needs to be changed after six months.

The Longlast filter can produce 120 gallons of fresh water in six consecutive months, equal to 900 standard single-use plastic bottles.

That is more affordable during long-term use and reduces plastic waste in the environment.

It means you want only 2 Longlast filters every year, so you won’t need to waste too much on filter replacements for fresh and clean alkaline water.

Brita water filter pitcher Doesn’t Filter Bacteria

Although we have a long review list of good things about Brita replacement water filter, it doesn’t mean that we have no complaint against it.

You may be wondering what it does for a complaint but my friend, it is all about what it does not do.

In short, it does not filter bacteria, so it is not suitable for untreated water.

Bacteria can cause many health diseases, so if you want to treat bacteria, then you can select a better one with bacteria filter capacity.

Affordable and Easy to Find

Brita has more than 50 years of manufacturing experience in water filter pitchers and is available in more than 69 international nations over five continents.

The company always satisfies its customers by providing the best quality Brita products in an affordable range that’s why maximum user recommends Brita.

Easily available in your nearest local stores and online suppliers so, you can get it online in several clicks at your door.

The easy filter replacements availability with an affordable range makes it the best economical and practical water filter in the market.

NSF/ANSI 53-Certified

Ideally, you should select a classic water filter and jug certified by NSF/ANCI that shows the filter and pitcher checked with strict health and sanitary standards.

The filter comes with ion exchange resin made from food-grade material and removes specific ions, such as calcium, from water.

NSF/ANSI 53 certification assures the user about quality and pure contaminants-free same as bottled water.

You can easily find the label on Brita Longlast and Standard filters.

There is also detailed information on Brita’s website with a list of NSF/ANSI 53-certified products.

Brita filter No Pre-Soak Required

Brita designed the Longlast filter for ease of use and user-friendly.

You don’t need to soak in water before changing fine meshes and absorbents, which makes Brita filter put and get pure water.

Basically, you need only set it into whatever Brita pitcher you have, and in seconds, you’ll get pure contaminant-free drinking alkaline water.

Why does the longlast filter/ Brita Faucet filter slow, review 2022?

The filters are effective in removing maximum contaminants and particles from your tap water.

Brita filters are available in five types:

  • Brita Standard filter
  • Longlast filter
  • Brita stream pitcher filter
  • A water bottle filter
  • Brita Faucet filter

It might be possible that you may get a slow filtration speed due to some reasons, which is so disturbing.

These are the bother reasons behind it:

1. Air blocks in the filter

There could be air bubbles in the water filter, making filter speed slow down.

To verify this, drop the filter in a water-filled bucket or container if the filter floats that indicates the filter is an air block.

You should wet the filter in cold water for 20-25 minutes to eliminate the air block.

After that, flush the filter with flowing faucet water for 25 seconds and install it in the pitcher.

If it still blocks, keep the filter under water and tap gently at the bottom of the container to lose bubbles.

Confirm again and install the filter in a pitcher.

2. Not Replacing the Brita Filter on time

Somehow, if you don’t replace the filter at a relevant time, it could slow your filter speed.

You should be monitoring the filter life indicator on the Brita water pitcher and replacing it according to the proper time.

3. High Sediment levels

If there are pollutants, sand, clay, minerals, or rust available in your tap water, it can stock your Brita filter finally, you get slow dripping.

It is also a cause of a little moldy smell you would not like to get from your water filter pitcher.

The water filtration takes more than 10-15 minutes average time to fill the reservoir, its mean filter can slow due to particles.

We advise installing an extra filtration system before using the pitcher.

4. Incorrect flushing of the filter

Flush is a must required before using filtered water, it is simple but rarely could be incorrect flushing.

It is an easy task but somehow if, it goes wrong can affect your filter capacity.

So, be sure that the filter is installed properly in a jug.

It is important to get the best quality filtered alkaline water.

5. Faulty installation of the filter

Make sure that your water filter has been correctly installed in its place in the Brita water pitcher.

To install finely, you should carefully check the Brita products instruction manual or contact a representative to demonstrate.

Don’t forget there are different methods to install both filters Longlast and standard.

It is worth noting that listen to a “snap and click” while twisting the filter in its place to ensure correct installation.

And finally, check O-ring/seal has been fitted correctly on the filter pitcher device.

Brita water filter instructions

We all know well that Brita filters are removing contaminants from our tap water.

But, if you don’t replace the filter at the appropriate time, filters may not work as well as you think.

If you are dealing with hard water, you may require replacing the filter even more often.

Due to hard water, your Brita filter could be mineral deposits that could build up and prevent the cleaning process.

To make sure your water filter is working properly follow the guidelines below on correctly how often to replace your filter.

How to use Brita longlast filter  to reduce the risk of lead in drinking water?

Brita longlast filter can install same as, like a standard water filter, we will review steps up next and make sure it perfectly fits in the pitcher.

You should maintain hygiene in the water filter pitcher to clean regularly and ensure your water quality.

Also, give attention to the filter replacement time because it is more important to get regular filtered water.

When to Change Brita Filters?

Correctly how often you need to replace the filter, it all depends on how much water you filter through it.

Usually, an electronic filter change indicator or sticker helps to know the filter change time.

You can replace Brita Standard Filter (white) after every 40 gallons of filter water or about every two months.

The Brita Longlast water filter (blue) has the incredible capacity you need to change after every 120 gallons or almost every six months.

It has three times longer life than a zero water filter.

How can you clean Brita’s pitcher easily?

Brita designed its pitcher according to user convenience the Brita water filter pitcher comes apart for effortless cleaning.

The filter reservoir can remove easily by pulling out from closer to the arm rather than near the spout.

How to Replace Brita Filters?

When your pitcher needs filter replacement first, you need out your old water filter.

Take off the pitcher lid and put it besides, grab the filter by its top handle and pull out your old filter gently.

After that, flush the new filter under running cold water for 20 seconds.

Finally, install the filter correctly in the filter mold of the Brita pitcher with a light push.

Brita recommends discarding the first three pitchers full of filtered water after the new filter installation, it may contain some black carbon dust.

After that, you can use freely filtered water.

How to Recycle Brita Filters?

No one wants to increase waste by throwing used filters every two to six months.

So, Brita and TerraCycle do work together to recycle old filters.

First, you filled out the form available on Brita’s recycling page, and then you will get a free shipping label by email.

You can mail to recycle old filters using a free shipping label after packing and can get Brita rewards points to redeem for free goods or coupons.

FAQ about Brita Longlast filter review

How many types of Brita Filters?

Brita filters are available in five types in the market:

1 Brita Standard filter can filter mercury, cadmium, zinc, copper, chlorine taste, and odor.

2 Longlast filter is effective in chlorine, cadmium, asbestos, mercury, benzene, and lead reduction.

3 Brita stream pitcher filter can perfectly filter chlorine, trichlorobenzene, particulates you need to change after 40 gallons or approximately every two months.

4 A water bottle filter is lightweight can remove chlorine, particles from water.

5 Brita Faucet filter cleans chlorine, benzene, lead, mercury, trichlorobenzene, TTHMs, asbestos, particulates from tap water, and delivers great tasting water.

How do you check filter life status?

Mostly of water filter pitchers have a led indicator, and you press the indicator button that will show you whether the longlast filter requires to be replaced or not.

If your filter has no indicator, then there may be a sticker by which you can calculate manually to know the exact time of the replacement filter.

Why is my new Brita Longlast filter so slow?

Brita longlast filters can filter slowly due to being clogged by air bubbles, pollutants, sand, clay, minerals, rust, incorrect installation.

You should take care of these things and make sure the main reason for slow filtering and then take the right step to resolve it.

How do you fix a slow Brita pitcher filter?

If you are using an old filter, check the filter change indicator and change your old filter if required.

Now, we are reviewing better techniques to resolve the air bubble lock problem so you can dip the Brita filter into the water and tap gently to release trapped air or flush the longlast filter.

For sediments and debris, wash the filter under spray running water and push water from the filter.

You can always check drinking water quality from time to time to make sure your alkaline water is not dirty; it is as pure and clean as bottled water.

Can Brita filter remove total dissolved solids?

Brita filters can remove more than 60 contaminants, but they don’t claim to reduce total dissolved solids (TDS).

The filters can reduce TDS, but they are not much effective.

The filter uses an ion exchange resin to eliminate specific ions from your water, such as calcium and magnesium.


Maximum Longlast filter users are more satisfied with its durable life and performance compared to standard Brita filters.

Brita Longlast has become a popular filter in the market as above review, and it is regularly providing a delicious taste of water free from many dangerous contaminants.

That’s why we consider it a great filter and recommend it for everyone who wants an affordable approach to filtered water.

I hope you like Brita Longlast filter review 2022, and if you want to improve something in this so, please write to us……


Leave a Comment